 |
|
|||||||
|
||||||||
| Clinical Case 3 - By Brian
Tang DDS, MCD Dr. Brian Tang received his BAS with distinction from Stanford University and his DDS from the University of California, San Francisco. Dr. Tang also received a Master degree in Prosthodontics with distinction at the University of London (UK). Dr. Tang holds six US patents in the field of Prosthetic Dentistry. He is also the inventor of EZ Stent. |
 1. Cast model of patient missing teeth #31. |
 2. Mark the point of entry on the cast model. |
 3. Survey and prepare the model using the ø2.3mm drill bit with a drill press. Then, insert a ø2.3mm X 20 mm guide pin halfway into prepared site to get an ideal drilling trajectory. Secure the guide pin with super glue or wax. |
| Next>> | |
|
Copyright , All Rights Reserved
|